Sargent 281 Series Cast Iron Closer Manuel d'utilisateur télécharger pdf

281 DOOR CLOSERS WITH O10, H10 & SSO ARMS

INSTALLATION INSTRUCTIONS

281 SERIES ADJUSTABLE FROM SIZE 1 THRU 6

CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY MAY RESULT IN INJURY OR DAMAGE.

FOR ASSISTANCE, CALL SARGENT AT 1-800-727-5477.

DRILL AND TAP DOOR

AND FRAME FOR #12-

24 MACHINE SCREWS.

RIGHT HAND SHOWN,

LEFT HAND OPPOSITE.

*NOTE: FOR MAXIMUM

POWER, INSTALL FOR

110° OPENING

PULL SIDE PULL SIDE

PUSH SIDE PUSH SIDE

LEFT HAND DOOR RIGHT HAND DOOR

CLOSERS ARE NON-HANDED

ATTACH ARM TO FACE OF FRAME.

RIGHT HAND SHOWN

FOR H10 ARM ONLY

INSTALL MOUNTING BRACKET WITH ARROW POINTING UP FOR BOTH RH & LH DOORS. MOUNT CLOSER WITH SPRING

ADJUSTING SCREW AWAY FROM HINGE. SEE PAGE 2 FOR THRU BOLT INFO.

ALTERNATE: PREASSEMBLE ARM PRIOR TO

ATTACHING TO STOP.

the express written permission of Sargent Manufacturing Company is prohibited.

A7921C

1 2 3 4

281 DOOR CLOSERS WITH O10, H10 & SSO ARMS INSTALLATION INSTRUCTIONS281 SERIES ADJUSTABLE FROM SIZE 1 THRU 6CAUTION: FAILURE TO INSTALL OR ADJUST P

ACCESSORIESOPTIONAL: USE MORTISE NUTS (#4TB) WHEN THRU-BOLTING IS REQUIREDDA. ATTACH ARM WITH INDEX MARK ON SPINDLE ALIGNED AS SHOWN BELOWB. SECURE W

FINAL ADJUSTMENT AND REGULATING PROCEDURESF3HINSTALL COVER WITH TWO SCREWS AS SHOWN.SSP INCLUDES HANDED METAL COVER (NOT SHOWN) AND 6 LOBE SECURITY S

Plus de documents pour Sécurité Sargent 281 Series Cast Iron Closer

Pas de commentaire